| T O P I C R E V I E W |
| bandjel |
Posted - 12/15/2009 : 07:08:43
Are you going to support M48T129Y? I need to program this chip. I can get sample for testing.
Best regards! |
| 12 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 03/08/2010 : 17:57:03
If the slower speed does not work with Re5.01Beta, thenI think we need a testing chip to reproduce the problem. |
| bandjel |
Posted - 03/08/2010 : 10:05:28
D'ont work! Same situation with version 5.00. |
| ZLM |
Posted - 02/27/2010 : 22:56:10
Can you try the 5.01 beta?
http://www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe5.01Beta.exe |
| bandjel |
Posted - 02/25/2010 : 15:04:48
New test. Nothing news with M48T129Y! Same problem with memory reading at adresses 1FFF9 and 1FFFA. I made many combination with Vcc, Speed, but nothing good. Always unstable reading. Writing is good comparing with Elnec SmartProg. |
| ZLM |
Posted - 02/16/2010 : 14:08:39
This one voltage changed to 5V maximum. |
| bandjel |
Posted - 02/16/2010 : 02:20:24
I have tried , already, manually, to change speed factor, but no result. But, at this moment, I don't have any samples to try. |
| ZLM |
Posted - 02/13/2010 : 22:15:02
Try this line:
Name="M48T129Y",ID="XXXX",Class="BQ4015",Category="SRAM",MFG="ST",VCC="5V",PINVCC="ZIF32_PIN32",CodeSize="131072",Package="DIP32",Speed=3;
|
| bandjel |
Posted - 02/13/2010 : 03:40:58
Ok, there are some tests.
M48Z128Y is OK, read, write, verify. The BEST!
Name="M48Z128Y",ID="XXXX",Class="BQ4015",Category="SRAM",MFG="ST",VCC="5V",PINVCC="ZIF32_PIN32",CodeSize="131072",Package="DIP32";
M48T129Y
Name="M48T129Y",ID="XXXX",Class="BQ4015",Category="SRAM",MFG="ST",VCC="5.5V",PINVCC="ZIF32_PIN32",CodeSize="131072",Package="DIP32";
Read is NOT OK. Always shows error only on adresses 1FFF9 and 1FFFA, unstable reading, different values.
Writing is always OK. This function is compared with ELNEC SmartProg.
Verifiying is like Read, unstable on adresses 1FFF9 and 1FFFA
Do you have some idea to resolve this problem? |
| bandjel |
Posted - 12/15/2009 : 09:38:24
Ok, I will let you know. I need some time to get samples. Thanks |
| ZLM |
Posted - 12/15/2009 : 09:33:41
You can add this device.
Add following lines into devices.txt:
Name="M48T129Y",ID="XXXX",Class="BQ4015",Category="SRAM",MFG="ST",VCC="5.5V",PINVCC="ZIF32_PIN32",CodeSize="131072",Package="DIP32";
Name="M48T129V",ID="XXXX",Class="BQ4015",Category="SRAM",MFG="ST",VCC="3.6V",PINVCC="ZIF32_PIN32",CodeSize="131072",Package="DIP32";
Please let me know if this works.
|
| bandjel |
Posted - 12/15/2009 : 09:09:07
There are no such device in option of USBPrg5! |
| ZLM |
Posted - 12/15/2009 : 07:43:58
This M48T129Y will work. |
|
|
