| T O P I C R E V I E W |
| Necrosaro420 |
Posted - 01/20/2010 : 17:24:29
Is there a way to turn this message off??? I know the files I use are good, I have used them several times before. But now on 2 different pc's I try to load files up and it gives me "Checksum error reading HexFile" and it wont load the files to let me burn them. These are 4 meg files using M29F032d Using v5 software. Thanks |
| 4 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 01/22/2010 : 10:21:29
Looks like a bug. We will check the software.
|
| Necrosaro420 |
Posted - 01/22/2010 : 04:29:50
Heya, if I go to file>open and browse to the file this happens. But then directly after that, if I go to File and then scroll to the bottom of recent opened ones and pick the exact same file, it does not do this, and it burns fine. Sounds liek a bug in the prog IMO |
| ZLM |
Posted - 01/21/2010 : 21:36:08
Then the hex file may be not a good one. Or you can send it to me check it.
Another way is to convert your hex file to bin file use the convertor. Then load the bin file. |
| Necrosaro420 |
Posted - 01/20/2010 : 17:26:29
BTW, one pc is using Win 7 Pro, other is XP Pro |
