| T O P I C R E V I E W |
| mcumall |
Posted - 05/29/2006 : 11:56:47
The new devices will be added regularly, please check the latest list from here:<BR>
http://www.mcumall.com/comersus/store/mcumall_TrueUSBWillemsupportICs.asp |
| 19 L A T E S T R E P L I E S (Newest First) |
| lando |
Posted - 12/27/2007 : 05:19:18
For information, I just receive PIC12F683 for test.
thx |
| ZLM |
Posted - 12/11/2007 : 21:12:27
currently not. but it will be added soon. |
| apmdba |
Posted - 11/27/2007 : 04:36:09
Please, is possible to program the SST 25VF080B with GQ-3X ?
The data sheet is here h**p://www.sst.com/downloads/datasheet/S71296.pdf
Thanks
apmdba |
| ZLM |
Posted - 11/15/2007 : 01:05:35
PIC12F683 will be supported in the future release. |
| ZLM |
Posted - 11/15/2007 : 01:04:38
DS1245Y need to modify the software. Please let us know if you have this chip for testing. |
| Frank D |
Posted - 11/14/2007 : 22:00:28
I do not see support for DS1245Y-120 and DS1245Y-120+ chips? |
| ZLM |
Posted - 11/14/2007 : 00:01:52
Name="PIC12C508",ID="XXXX",Class="PIC12F508",Category="MCU",MFG="Microchip",Package="DIP8",ENDPRG_COMMAND="14",PRG_MODE="0"; No ID device need ID="XXXX"
Name="PIC12C508A",ID="XXXX",Class="PIC12F508",Category="MCU",MFG="Microchip",Package="DIP8",ENDPRG_COMMAND="14",PRG_MODE="0"; No ID device need ID="XXXX"
Name="PIC12C509",ID="XXXX",Class="PIC12F508",Category="MCU",MFG="Microchip",CodeSize="2048",Package="DIP8",ENDPRG_COMMAND="14",PRG_MODE="0"; No ID device need ID="XXXX"
Name="PIC12C509A",ID="XXXX",Class="PIC12F508",Category="MCU",MFG="Microchip",CodeSize="2048",Package="DIP8",ENDPRG_COMMAND="14",PRG_MODE="0"; No ID device need ID="XXXX"
|
| lando |
Posted - 11/09/2007 : 17:29:29
hello
is it possible to have support of PIC12F683?
thx |
| fawaz |
Posted - 10/20/2007 : 01:32:53
Hello,
I looked at the list of supported devices only to find that my device 12C509A is not on the list.
It is possible added the device in the list? ?
|
| ZLM |
Posted - 10/07/2007 : 10:20:33
Added this line to devices.txt:
Name="UPD27C4000",ID="XXXX",Class="27C800",Category="EPROM",MFG="NEC",CodeSize="524288",Adapter="16 BIT EPROM ADAPTER 42pin/combo",RVpp="5V",Message="Put chip in 42 pin socket and bottom aligned with the socket."; |
| voxel |
Posted - 10/07/2007 : 07:17:39
Hi :-)
Finally Igot the datas I needed :-)
You can add it to the device list as UPD27C4000D, NEC as a 27C400 drop pin replacement :-)
Amigalement,
Jean-François, Amiga nuts since 1985 :-) |
| voxel |
Posted - 10/01/2007 : 11:41:25
Hi :-)
I wasn't able to find one too :-( that's why I asked here :-(
I have only one of it, not mine, that I must read to repair another product that had it's eprom killed.
I can't let it got elsewhere as I must send t back to it's owner.
:-(
Amigalement,
Jean-François, Amiga nuts since 1985 :-) |
| ZLM |
Posted - 09/30/2007 : 19:49:00
I did not find datasheet of it. If you have it please forward it to me. Then I can let you know how to add this chip in GQ-2X supported list. |
| voxel |
Posted - 09/29/2007 : 05:46:03
Hi :-)
I don't find the D27C4000D from NEC in the list.
It's an UV EPROM, 40 pin DIP, what is the setting for GQ-2X?
Amigalement,
Voxel
Amigalement,
Jean-François, Amiga nuts since 1985 :-) |
| jmoliere |
Posted - 11/10/2006 : 17:50:05
BlueSky,
Bummer, Thanks!
quote:
Originally posted by BlueSky
Most of programmer do not support 2708. I do not know if any direct replacement for it. I doubt it has.
James Moliere |
| BlueSky |
Posted - 11/10/2006 : 02:51:30
Most of programmer do not support 2708. I do not know if any direct replacement for it. I doubt it has. |
| jmoliere |
Posted - 11/08/2006 : 12:26:31
Hello,
I looked at the list of supported devices only to find that my device is not on the list.
Is there an alternative to the 'MCM2708C'? The manufacturer of this device is Motorola.
Thanks!
James Moliere |
| ZLM |
Posted - 07/26/2006 : 11:41:41
yes. The M27C512 is a standard 27C512 EPROM. It will be supported under a generic 27C512. |
| vulcan1 |
Posted - 07/26/2006 : 09:25:21
Is there a reason the ST M27C512-12B1 EPROM is not on this list? Can it be programmed with the generic 27C512 setting? |
