| T O P I C R E V I E W |
| sylverster16v |
Posted - 06/23/2011 : 09:19:36
hi,
i have gq-4x fwh/lpc+ v2 adapter and 2 chips tsop40.
both chips are from running systems but i cant get id.
there is no tsop40 settings only tsop32 in the config.
please help |
| 7 L A T E S T R E P L I E S (Newest First) |
| Foul |
Posted - 12/02/2011 : 12:53:02
up !
Exactly the same prob .. tested with 2 differents chips ..
On searching this forums ... many users have the same probs ... any update planned ?
Thank you ! |
| ZLM |
Posted - 06/29/2011 : 18:18:16
Adapters are correct. Make sure all three jumpers on the ADP-071 are set.
If the chip is good, then the problem maybe on the adapter. Check all pin contact. |
| sylverster16v |
Posted - 06/28/2011 : 13:50:35
no idea? |
| sylverster16v |
Posted - 06/26/2011 : 04:58:23
quote:
Originally posted by ZLM
which adapter you used then?
i used ADP-071 TSOP32 TSOP40 FWH/LPC+ base board
and
ADP-077 TSOP 20mm adapter set top ZIF board on it.
the id is fffff
i have also the fwh/lpc+ v2.1 but there is no dip socket on it,only the holes. |
| ZLM |
Posted - 06/25/2011 : 22:56:13
which adapter you used then? |
| sylverster16v |
Posted - 06/24/2011 : 15:45:37
tried every speed to erase and blankcheck,but evertime blankcheck stops with 34% |
| sylverster16v |
Posted - 06/24/2011 : 12:25:55
datasheet:
www.datasheets.org.uk/pdf/getfile.php?dir=Datasheets-35&file=DSA-688328.pdf&scan= |
