MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 SST49LF004B Tsop40 no ID		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

sylverster16v

Germany
69 Posts
Posted - 06/23/2011 :  09:19:36  Show Profile  Reply with Quote
hi,
i have gq-4x fwh/lpc+ v2 adapter and 2 chips tsop40.
both chips are from running systems but i cant get id.
there is no tsop40 settings only tsop32 in the config.
please help
Reply #1

sylverster16v

Germany
69 Posts
Posted - 06/24/2011 :  12:25:55  Show Profile  Reply with Quote
datasheet:
www.datasheets.org.uk/pdf/getfile.php?dir=Datasheets-35&file=DSA-688328.pdf&scan=
Go to Top of Page
Reply #2

sylverster16v

Germany
69 Posts
Posted - 06/24/2011 :  15:45:37  Show Profile  Reply with Quote
tried every speed to erase and blankcheck,but evertime blankcheck stops with 34%
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 06/25/2011 :  22:56:13  Show Profile  Reply with Quote
which adapter you used then?
Go to Top of Page
Reply #4

sylverster16v

Germany
69 Posts
Posted - 06/26/2011 :  04:58:23  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

which adapter you used then?


i used ADP-071 TSOP32 TSOP40 FWH/LPC+ base board
and
ADP-077 TSOP 20mm adapter set top ZIF board on it.
the id is fffff

i have also the fwh/lpc+ v2.1 but there is no dip socket on it,only the holes.
Edited by - sylverster16v on 06/26/2011 05:06:01
Go to Top of Page
Reply #5

sylverster16v

Germany
69 Posts
Posted - 06/28/2011 :  13:50:35  Show Profile  Reply with Quote
no idea?
Go to Top of Page
Reply #6

ZLM

2945 Posts
Posted - 06/29/2011 :  18:18:16  Show Profile  Reply with Quote
Adapters are correct. Make sure all three jumpers on the ADP-071 are set.

If the chip is good, then the problem maybe on the adapter. Check all pin contact.
Go to Top of Page
Reply #7

Foul

France
13 Posts
Posted - 12/02/2011 :  12:53:02  Show Profile  Reply with Quote
up !

Exactly the same prob .. tested with 2 differents chips ..

On searching this forums ... many users have the same probs ... any update planned ?

Thank you !
www.jamma.fr
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000