| T O P I C R E V I E W |
| bandjel |
Posted - 08/13/2011 : 08:10:59
As you can see, I have used ezo to willem convertor pod pcb for programming S29AL008D..02. Adresse A19 must be connected to pin 4 on ZIF. You must add next line in devices.txt
Name="S29AL008D..-02*TSOP48_B2",ID="015B",Class="29F800T",Category="FLASH",MFG="SPANSION",Adapter="TSOP48_B2 by EZO + pod",VCC="3.6V",Message="Set the adapter to 5V jumper position.";//by BAndjel
and everything is ok. But, if you select ordinary "S29AL008D..-02" from menu, you can't read, write, .... |
| 4 L A T E S T R E P L I E S (Newest First) |
| bandjel |
Posted - 08/20/2011 : 13:46:58
I have file for programming for Samsung SCX 4300 (I got it from my friend). I checked ID, it is correct. I write, then verify, then read to new file, then erase, check if is blank, then write again, verify and PLACE to Samsung SCX 4300. Samsung works well. I think it is good testing :) |
| ZLM |
Posted - 08/19/2011 : 16:31:06
What you get when you reading? How do you know the reading is not correct? |
| bandjel |
Posted - 08/19/2011 : 13:14:10
Yes, ID is correct. With added line, everything is OK. Chip is OK, and contacts off course. Chip is placed in Samsung SCX 4300 and works well. |
| ZLM |
Posted - 08/14/2011 : 23:57:29
Can you get corredt ID?
Check your chip contacting, also make sure the chip is a good chip. |
|
|
