| T O P I C R E V I E W |
| M1DJF |
Posted - 10/17/2013 : 02:35:58
Hi
Could some one help me how can I use ADP-056 JTAG adapter with what settings on GX4 programmer would appreciate all help trying to read tms 470 and other etc.
Thank you. |
| 4 L A T E S T R E P L I E S (Newest First) |
| M1DJF |
Posted - 10/25/2013 : 03:24:29
Thank you ZLM for your help will try and report back your help was much appreciated . |
| ZLM |
Posted - 10/24/2013 : 14:17:49
No special settings from software. The adapter only has one VCC to target on/off jumper.
see video ADP-056 JTAG with GQ-4X for Altera EPM3128A CPLD:
www.youtube.com/watch?v=RBLEZNL3L2Q
|
| M1DJF |
Posted - 10/24/2013 : 13:15:59
CPLD devices could you please tell me what settings do I use on the software as I will be using as jtag please excuse my ignorance. |
| ZLM |
Posted - 10/17/2013 : 09:55:31
The tms 470 is not supported on this programmer. The GA-4X JTAG used to support CPLD devices programming. |
