| T O P I C R E V I E W |
| gaosqq |
Posted - 03/30/2015 : 06:23:39
In 2013 I asked if there was a possibility to get 5Volt from programmer.
ZLM answered, that this only could be done with external power supply.
I was not happy with the answer, because I could program a 2313 direct in the socket with internal power supply.
After a little research and measurements I could make a adapter with a can6 connection and it worked. Now I can program any AVRISP without external power supply.
Image Insert:
208.25 KB
Image Insert:
212.54 KB
Image Insert:
157.64 KB |
| 3 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 05/07/2015 : 15:52:56
Thanks.
Here is the ZIF socket pinout:
Image Insert:
4.01 KB |
| gaosqq |
Posted - 05/07/2015 : 09:58:56
I have had some questions.
The relevant answers:
No, no hardware modifications,
No, no software modifications.
No, no script.
Just the Original GQ-4X
Select device from list
and ignore the message
(External)Power on target device is required.
Connections:
RST... * *.. Take +5V from here.
MISO. * *.. empty
SCK... * *.. empty
GND... * *.. MOSI
Take care.
|
| ZLM |
Posted - 04/02/2015 : 22:22:08
Thanks. Your target board is small and not other component. So, it can be powered from programmer. |
