Hi again me , i setup your sending 4.x program and i try 28f160 and 39vf160 but i have an error . At 28f error you know . at 39vf160 , when i try to read id this chip sometimes sst 39vf160 sometimes FFFFF some times sst not library ... i programmed 29lv160attc and 29w800 flash 8/16bit adaptor and i havent any mistake. read erase write and verify ok but 16 bit chips (28f and 39vf) i got errors. generally i can read but not erase and write. my programmer or adaptor have and hardware errors?
I got one TE28F160CB3 chip for testing. and I tested it on both GQ-3x and GQ-4X. Both are succeed without any problem on "TSOP48 16 bit adaper V2.0" So the sofrware Re4.0Beta3 has no problem.
i have same problem cant program the intel te28f160 cb3. i only program one with the 39vf160 configuratio, then i try to program another chip and dont work check and recheck configurations everyting ok 3 6 jumper on 28fxx ok 19 20 21 ok coclusion programers have failures!!!!!
39vf160 and 28f160 and again problem
Posted - 02/06/2009 : 20:22:44
