| Author |
 Topic  |
|
|
selmar
3 Posts |
 Posted - 11/05/2007 : 02:55:31
|
Hello, Today I received the programmer GQ-3X R 1.00 WITH ADPATADOR TSOP48 16 BIT ZIF Adapter for Willem Programmer.
Can i program a 29f800 or a 29lv160 with this adapter ??
When i push ID with a 29f800 in the adapter, the device id is diferent, the response is BF03 and it should be 0158.
Sorry by my English, so I speak only a little |
|
| Reply #1
ZLM
2945 Posts |
|
| Reply #2
selmar
3 Posts |
Posted - 11/05/2007 : 15:37:14
|
Hello, the TSOP48 16 BIT ZIF Adapter for Willem Programmer work fine with these flash in a willem parallel programmer 0.97ja i checked this .Why dont work with the USBPRG program ?
This adapter work fine with these flash in a willem eprom programmer parallel but donīt work in the gq-3x r1.00 i donīt understand this.
Best regards. |
 |
|
| Reply #3
ZLM
2945 Posts |
Posted - 11/06/2007 : 23:41:18
|
Yes. the parallel willem software supports 29LV160 on 16Bit TSOP48 adapter.
The True USB Willem hardware is supported 29LVxxx flash on 16Bit TSOP48 adapter. It is just a matter of software not implemented yet. |
|
|
| Reply #4
selmar
3 Posts |
Posted - 11/07/2007 : 16:33:02
|
O.k. Thanks for the answer, I hope that will be implemented with any new release.
Thank you again for your quick response. |
|
|
| Reply #5
andres
Colombia
4 Posts |
Posted - 12/15/2007 : 10:24:21
|
| Hello I have just received the programmer GQ-3X Re-1.00 with adapter for the memory AT49F040-12TI, I can read the information of the memory but he/she doesn't allow to fade it write it again. you could you explain to me that I should make. thank you |
|
|
| Reply #6
ZLM
2945 Posts |
Posted - 12/25/2007 : 19:13:26
|
| The chip need to be erased before write. Also do a blank check before write. |
|
|
| Reply #7
repairs
India
2 Posts |
Posted - 01/11/2014 : 05:58:35
|
hi dudes,
i've gq-4x usb programmer, but its not support this amic (a25l010c)please anyone can help me
|
Repairs |
|
|
| Reply #8
ZLM
2945 Posts |
Posted - 01/11/2014 : 09:35:00
|
Try this:
Name="A25L512",ID="373010",Class="W25X10",Category="SERIAL_EPROM",MFG="AMIC",Vcc="3.6V",CodeSize="65536";
Name="A25L010",ID="373011",Class="W25X10",Category="SERIAL_EPROM",MFG="AMIC",Vcc="3.6V",CodeSize="131072";
Name="A25L020",ID="373012",Class="W25X10",Category="SERIAL_EPROM",MFG="AMIC",Vcc="3.6V",CodeSize="262144";
Add those lines into devices.txt file.
Let me know if this works. |
|
|
| |
Topic |
|
Can i program a 29f800 with a 16 bit adapater?
