| Author |
 Topic  |
|
|
Necrosaro420
109 Posts |
 Posted - 08/16/2010 : 18:54:08
|
| My M27C800's used to burn fine, but they all of a sudden quit programming. The adapter is fine, as I can burn M27C160 and 322's just fine. I have several 800's from 3 different places. I have the True USB v3 |
|
| Reply #1
ZLM
2945 Posts |
Posted - 08/17/2010 : 01:12:30
|
"quit programming"??
what is the error message? |
 |
|
| Reply #2
Necrosaro420
109 Posts |
Posted - 08/20/2010 : 20:09:39
|
What I mean by quit, is they used to work fine...but they no longer program, and I have received chips from several different places and they still wont burn. Here is the message im getting:
Write failed, Address=0x000002, Buffer=0x02 Device=0x00
I have verified that they are blank |
|
|
| Reply #3
Necrosaro420
109 Posts |
Posted - 08/22/2010 : 13:35:34
|
| Im going to try the updated software, have been using the previous version, later tonight and see if that will take care of it. |
|
|
| Reply #4
Necrosaro420
109 Posts |
Posted - 08/22/2010 : 17:59:16
|
| New software has same result. Also tried new software with a different pc, same deal. Verifys blank, but will not program. Though using the same adapter 27c160 and 27c322 works fine |
|
|
| Reply #5
Necrosaro420
109 Posts |
Posted - 08/24/2010 : 13:15:21
|
| Same error message except Buffer=0xFE using 160 setting trying to burn 800 |
|
|
| Reply #6
Necrosaro420
109 Posts |
Posted - 08/30/2010 : 10:45:05
|
| anyone? |
|
|
| Reply #7
Cochobot
4 Posts |
|
| |
Topic |
|
27C800's quit burning....
