MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Connect GQ-2X through Powered USB Hub?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ko6no

USA
3 Posts
Posted - 02/22/2007 :  20:10:36  Show Profile  Reply with Quote
Just installed the S/W and programmer. Programmer was plugged into one port of a D-Link powered USB Hub. Hardware Wizard detected programmer and driver was installed. S/W couldn't get a response from H/W. Plugged programmer into USB port on CPU. S/W found and initialized programmer. I don't know yet what voltage the D-Link Hub is providing. Is this normal?
-ko6no-
Reply #1

ko6no

USA
3 Posts
Posted - 02/22/2007 :  20:44:59  Show Profile  Reply with Quote
Disregard my query. I discovered the power plug for the hub is intermittent. Programmer now works through USB Hub.
-ko6no-
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000