MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Microwire EEPROM & GQ-4x		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Oleh

Ukraine
1 Posts
Posted - 11/08/2013 :  01:15:11  Show Profile  Reply with Quote
Hallo All!
Why after reading, for example STM or Fair 93C86 in 16- AND 8-bit mode after saving both results we have a 100% same contents in files (. bin)?
Maybe it's a my mistake, but typically, 16-bit contents just is swapped byte compared to 8-bit in file.

GQ-4X Hw 1.41 \ SW 6.23.
Edited by - Oleh on 11/08/2013 01:25:00
Reply #1

ZLM

2945 Posts
Posted - 11/08/2013 :  23:26:46  Show Profile  Reply with Quote
That is depending on your software. As long as you use same data file from same programmer to read and write, then there is no problem.

However, if you use a 16 bit data file from different programmer, then you need to make sure the data write to the chip in same order.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000