MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 How to flash S25FL064A (FL064PIF)?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Dmitriy

Russia
4 Posts
Posted - 04/28/2014 :  05:07:47  Show Profile  Reply with Quote
64 Megabit CMOS 3.0 Volt Flash Memory with 50MHz SPI (Serial Peripheral Interface) Bus
Datasheet www.spansion.com/Support/Datasheets/S25FL064A_00.pdf" target="_blank">h p://www.spansion.com/Support/Datasheets/S25FL064A_00.pdf

I have GQ-4X and adapter SOIC28. And I not found support for this flash in Device list (but in this page it is there www.mcumall.com/comersus/store/mcumall_willemsupportICs.asp" target="_blank">h p://www.mcumall.com/comersus/store/mcumall_willemsupportICs.asp).
Edited by - Dmitriy on 04/28/2014 05:19:49
Reply #1

Dmitriy

Russia
4 Posts
Posted - 05/02/2014 :  11:53:33  Show Profile  Reply with Quote
Tnx for reply... Good support.
Answer itself.
I'm added the line to devices.txt and using for that adapter SOP16 to DIP8
Name="S25FL064*SOIC16",ID="010216",Class="W25X10",Category="SERIAL_EPROM",MFG="Spansion",Vcc="3.6V",CodeSize="8388608",Platform="GQ-4X";
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 05/05/2014 :  11:46:41  Show Profile  Reply with Quote
Good try.

Add a adapter information in the device line may be a good idea:

Name="S25FL064*SOIC16",ID="010216",Class="W25X10",Category="SERIAL_EPROM",MFG="Spansion",Vcc="3.6V",CodeSize="8388608",Platform="GQ-4X"，Adapter="SOIC16 to DIP8";
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000