T O P I C R E V I E W |
Satashi26 |
Posted - 10/26/2015 : 11:33:05 I've tried 10 different EPROMs (M27C322) and 5 different filed, every single one had a write fail. I'm at my wits end trying to figure out why. Using adapter for the 42 pins
Brand new programmer/adapter. Installed software/USB drivers. Windows 7. Start up, put in adapter, put in EPROM, blank check, all good.
Chose file, click write, get to 50%ish and write fail.
Disabled Data execution prevention for it. Tried writing at lower speeds. Still failing.
EDIT: now they write 100% but fail at verify at 50%, where it used to write fail...
Any help would be VERY well appreciated. |
1 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 10/27/2015 : 13:08:23 If it fails on exact 50% address 200000, then it must be address jumper not set on 27C322 position.
Check jumper J1. |
|
|