MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 shift and pattern adr (or ) offset hex		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

84sslt1

USA
13 Posts
Posted - 11/16/2008 :  20:12:11  Show Profile
Where do I put the 8000 offset value. I tried pattern adr, and offset (hex) at the same time and got error message(Error at 0x000000 chip =0xff buffer =0x000) What'd I do wrong?
Reply #1

ZLM

2945 Posts
Posted - 11/18/2008 :  17:44:09  Show Profile
If the programmer is GQ-3X, GQ-4X, then see:
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=1169
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000