MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 willem programmer cannot write 95040 successfully		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

k0mpresd

17 Posts
Posted - 04/28/2009 :  19:22:09  Show Profile
if you took the hex and divided it up in to 4 equal rectangles, the device will program the top left 1/4 space. then it tries to write the remaining 3/4 of data in to the top right section. the bottom half of the data on the chip is never erased or written. i can provide a picture to better explain what im talking about. i have read other places programming 95040 with a willem is a known issue. is there a fix?? thanks.
Reply #1

ZLM

2945 Posts
Posted - 05/18/2009 :  15:08:29  Show Profile
The chip may be protected on some section.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000