MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 2716		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

loudnproud59

Canada
1 Posts
Posted - 10/04/2005 :  20:23:35  Show Profile
just got the willem enhanced programmer i have read some post that say you can not read or write to the 2716 with the willem ehanced programmer.i needed to use this for programming new roms for a pinball machine,any help would be great
Thank you
Reply #1

ZLM

2945 Posts
Posted - 10/05/2005 :  10:34:16  Show Profile
The Enhanced willem does not handle NMOS chip well since it has insufficient current issue.Such as 2716,2732...etc. But I know some users used a jumper wire from ZIF pin 32 to ZIF pin 28, and they can read those chips correctly. I'm not sure if they can be write correctly.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000