MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 MX29F00-T, "ERROR at 0x01F193 Chip = 0xFF buffer =		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

reiluke

2 Posts
Posted - 09/14/2006 :  22:57:44  Show Profile
Hi sirs,

I bought a enhanced willem programmer from mcumall heres what i did.

1. inserted my chip MX29F00-T
2. ran willem app .97ja, selected MX29F00-T as device
3. Set my DIP Position per indicated
4. I check get id it showed MATRONIX MX29F00-T so its correct
5. read the chip 100% ok, saved it to a file
6. erased the chip 100% erased, blank check 100% it said its blank
7. click on search button and click on unlock
7. loaded my rom file, clicked program
8. it stopped "ERROR at 0x01F193 Chip = 0xFF buffer = 0xC7

im sorry but i have never used a programmer before, i bought it
just to reprogram my dead laptop.

any help would be appreciated

thank in advance sirs
Edited by - reiluke on 09/14/2006 23:20:23
Reply #1

reiluke

2 Posts
Posted - 09/15/2006 :  02:38:38  Show Profile
i tried the programmer with my laptop, 100% programmed my chip, now to test with my dead laptop. thanks all
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000