MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Cant programm PMC PM49FL004T with Topwin2005		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

lziegler

2 Posts
Posted - 01/26/2007 :  10:49:10  Show Profile
Hallo,

I just baught a topwin2005 to program my bios a PMC PMFL49004T. I can erase, blank an read the flash-chip, but when i try to write the original bios file (binary-file) I always get an error. I only can write empty data on the chip. Has anybody an idea whats wrong?
Reply #1

ZLM

2945 Posts
Posted - 01/27/2007 :  03:20:35  Show Profile
if you can confirm the adapter you are using is correct, then most likely is the software problem.
Go to Top of Page
Reply #2

lziegler

2 Posts
Posted - 01/27/2007 :  06:59:20  Show Profile
sometimes i get a message like "trouble pin connector ...", but it depends on the chip type i select.
I tried different chip types. Sometimes the programmer seem to programm my bios, but when verifying the data i get an error and the chips seems to be empty. I bought an plcc32-dip28 adapter with 3,3 and 5 V. but i am no longer sure if it is the right adapter, because the chip type printed on the adapter is an other one then the 49FL004T.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000