MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 ram test
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

smf

2 Posts

Posted - 12/10/2007 :  23:25:51  Show Profile  Reply with Quote
I would like to test static ram chips, like a 62256, using the true usb programmer.

The parallel versions support this, is it just a software change that is required?
Reply #1

ZLM

2947 Posts

Posted - 12/11/2007 :  21:11:08  Show Profile  Reply with Quote
Currently the static ram test is not in the supported device list yet. But it should be able to do the test.

You can try to use BQ4011 to program it. It is compatible device on program.

When doing program test, uncheck the Verify box. It will be verified during the write process.

The test data you can just fill any data in buffer. If program passed, then the RAM is OK. If program failed, then the chip is not good.

OR add following line to the devices.txt

Name="62256",ID="XXXX",Class="DS1230Y",Category="SRAM",MFG="SUMSUNG",VCC="5V";
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000