| Author |
 Topic  |
|
|
sylverster16v
Germany
69 Posts |
 Posted - 05/30/2009 : 13:24:25
|
hello together,
iam trying to write a PM39LV040-70C:
Adp022-Adapter
H/W Re: GQ-4X Re-1.10
USB Driver Re.1.0
Software Re. 4.01
ID:ok
Erase:ok
Blankcheck: ok
but everytime it it writes just to 25% and it doesnt go on.
I tried every speed,but same result! |
Edited by - sylverster16v on 05/30/2009 13:40:29
|
|
| Reply #1
ZLM
2945 Posts |
Posted - 05/30/2009 : 21:14:15
|
-What is the exact error message? copy and paste here.
-clean all pins of chip and adapter, make sure all pins are contacting good. |
 |
|
| Reply #2
sylverster16v
Germany
69 Posts |
Posted - 05/31/2009 : 01:36:14
|
There is no error message!
the programmer stands fix by 25%.
all other funktion like ,get ID,erase and blankcheck are ok.
pin contact are clean and ok
|
|
|
| Reply #3
ZLM
2945 Posts |
Posted - 05/31/2009 : 10:05:24
|
| Can you try to use a external 9V power supply? |
|
|
| Reply #4
sylverster16v
Germany
69 Posts |
Posted - 05/31/2009 : 10:32:35
|
It may be the software related.
Can you try on the different software version?-------ihave Software Re. 4.01 only ,do you have another softw version?
Do you have another same type chip for testing?------- no :(
the chip is a low volt version,the usb power is not enough? |
|
|
| Reply #5
ZLM
2945 Posts |
Posted - 05/31/2009 : 17:48:57
|
| If the chip is demaged, then it may use more power than good one. The external power will provide more DC power. |
|
|
| Reply #6
sylverster16v
Germany
69 Posts |
Posted - 06/03/2009 : 14:17:44
|
after changing the zif socket and cleaning the intenal usb controller chip,i can read,erase and write the chip without problems.
thx |
|
|
| Reply #7
yelenavik
USA
31 Posts |
Posted - 06/03/2009 : 18:27:08
|
| Hi ZLM.I have same problem like: sylverster16v.I think same problem inside programmer.If I will open programmer and solder pin of ZIF.Is it break warranty or no? Thank's |
|
|
| Reply #8
ZLM
2945 Posts |
Posted - 06/03/2009 : 22:32:18
|
| Yes. You can do that. |
|
|
| |
Topic |
|
GQ-4X PM39LV040*Vsop stops writing
